Change Mode on Esky ET4 2.4ghz transmitter (Honey Bee Fixed Pitch V2)
October 28, 2009
I accidently got a Mode 1 transmitter with my Esky Honey Bee Fixed Pitch V2. I prefer Mode 2, which is throttle on the left. Here are some pics and a PDF on how to swap it. No soldering involved.
-
- 1. Remove the 8 screws on the front
-
- 2. Remove the 6 screws on the back
-
- 3. View from the back
-
- 4. Remove the potentiometers on the bottom. They are rudder on the left and aileron on the right.
-
- 5. Remove the aileron pot
-
- 6. Remove the plastic plate on the other side of the box by taking out the 2 screws
-
- 7. Here is what it looks like disassembled. Do this for the other side too.
-
- 8. Turn this piece around, same for other side
-
- 9. Turn and swap these parts to the other side. The pots will be inward. Then reassemble the aileron and rudder pots (don’t swap these pots).
-
- 10. Put everything back together
-
- 11. Reverse the channels like shown
Related posts: